Category Archives: Flight Missions

Flight Test Preparation of our SAR System

Flight Test Preparation of Josaphat Laboratory (JMRSL) SAR system using Boeing 737 on 15 September 2016 at Indonesia.

Flight Test of Josaphat Laboratory SAR System at Indonesia

Coordination meeting at Indonesia to hold Josaphat Laboratory SAR system flight test at Indonesia using Boeing 737. This flight test get supporting by Indonesian Air Force. This technology could be implemented for

Progress Report on Lapan-Chibasat (GAIA-II/Lapan-A5)

Prof Josaphat attended progress report and review on development of Lapan-Chibasat (GAIA-II/Lapan-A5) at Indonesian Aerospace Agency (LAPAN), Rancabungur Office, Bogor, Indonesia on 13 March 2015. We discussed the progress on development of

Installing JMRSL Satellite Ground Station

Installing Josaphat Microwave Remote Sensing Laboratory (JMRSL) Satellite Ground Station at 9F of Faculty of Engineering Building, and Main Satellite Control Room, 8F and Sub Satellite Control Room 2F of CEReS Building.

CP-SAR and Hyperspectral camera onboard UAV JX-1 Flight mission

Circularly Polarized Synthetic Aperture Radar and hyperspectral camera onboard UAV JX-1 Flight mission at Fujikawa Airfield, Japan on 29 August 2013.

Assembling of JX-1 for CP-SAR Flight Test at Fujikawa Airfield

Assembling of JX-1 for three flight test at Fujikawa Airfield, Shizuoka, Japan on 29 August 2013.

Preparation of CP-SAR UAV Flight Mission

Our Circularly Polarized Synthetic Aperture Radar (CP-SAR) system for next UAV flight mission. This system is developed by collaboration with Multimedia University, Malaysia under JICA-JST Project.

Collaborators of UAV Flight Mission at Fujikawa Airfield on 29 August 2013

Collaborators of UAV Flight Mission at Fujikawa Airfield on 29 August 2013.

Staffs of Indonesian National Institute of Aeronautics and Space visited Josaphat Laboratory

Staffs and researchers of Indonesian National Institute of Aeronautics and Space (LAPAN), Mr Wahyudi Hasbi and Mr Bina Pratama visited Josaphat Laboratory on 26 August to 2 September to hold ground test

Preparing The 2nd Flight Mission of JX-1

Preparing our original Circularly Polarized Synthetic Aperture Radar (CP-SAR) payload for our Unmanned Aerial Vehicle (UAV) JX-1 flight mission on 29 August 2013 at Fujikawa Airfield, Japan.